Spandex Spin Finish: A Practical Guide for Fiber Mills
A spandex spin finish is a processing aid applied to spandex/elastane filament to manage friction, tack and static, supporting winding and downstream knitting. Suretop manufactures spin finish oils for spandex fibers; use the selection section and inquiry form to specify your process.
Ask for a finish recommendation
- Founded
- 2012
- Annual capacity
- 100,000 tons
- Transport package
- 200 L / 1,000 L drums

How Spandex Spin Finishes Are Applied on Spandex Filament Lines
The finish is normally applied as an aqueous emulsion or neat oil, depending on the finish design and the line configuration. It is metered onto the filament surface, then carried through the godet and winding path. Uniform pickup matters because spandex is elastic and tacky; excess finish can cause build-up, while insufficient finish can raise friction and disturb package formation. Mills adjust finish add-on to match filament denier, line speed, luster and the downstream knitting or covering process. A stable emulsion helps keep pickup consistent across the package.
Finish behaviour on the yarn is influenced by the base chemistry, emulsion stability and the balance between lubricity and cohesion. A finish that lowers friction too far can allow filaments to spread, while a finish with strong cohesion can help package shape but may increase drag at guides. Static control matters on dry lines and in low-humidity rooms. The fiber, process, denier and luster all change the required balance, so a finish that suits a conventional filament line may not suit an air-covered yarn line. Guide material and line speed also shift the friction balance.
Suretop supplies spandex fiber finishes within a broader spin finish range for polyester, nylon, spandex and aramid fibers. The specification tables on this page set out the measured properties for each spandex model, and a trial on the customer’s line shows how the finish behaves in winding and downstream processing. Related process chemistry is covered in what is spin finish and nylon spin finish.
Finish selection also accounts for how the yarn will be stored and converted. A package that will sit before knitting may need different surface behaviour from a package that moves straight to covering. Guide material, humidity and line speed change friction, so the same spandex yarn can require different finish balance at different mills. The specification tables on this page help compare models, while a trial on the actual line confirms how the finish performs in the customer’s process.
Spandex spin finish models and specifications
| Parameter | Value |
|---|---|
| Appearance | Colorless and transparent oily liquid |
| Moisture content | ≤0.1% |
| Flash point (open cup, ℃) | ≥150 |
| Kinematic viscosity (30℃, mm²/s) | 10.5~12.5 |
| Parameter | Value |
|---|---|
| Appearance | Colorless, transparent oily liquid |
| Moisture content | ≤0.1% |
| Flash point (open cup, ℃) | ≥150 |
| Kinematic viscosity (30℃, mm²/s) | 10.5~12.5 |
| Parameter | Value |
|---|---|
| Appearance | Colorless and transparent oily liquid |
| Moisture Content (%) | ≤0.1 |
| Flash Point (open cup, ℃) | ≥150 |
| Kinematic Viscosity (30℃, mm²/S) | 10.5~12.5 |
| Parameter | Value |
|---|---|
| Appearance | Yellow transparent oily liquid |
| Oil Content (%) | 90%±2% |
| PH Value | 6.6-8.5 |
| Kinematic Viscosity (30℃, mm²/s) | 110-140 |
| Emulsion Stability (10-20% concentration) | Transparent liquid, no delamination within 3 days |
| Parameter | Value |
|---|---|
| Appearance | Yellow transparent oily liquid |
| Oil Content (%) | 90%±2% |
| PH Value | 6.6-8.5 |
| Kinematic Viscosity (30℃, mm²/s) | 110-140 |
| Emulsion Stability (10-20% concentration) | Transparent liquid, no delamination within 3 days |
| Parameter | Value |
|---|---|
| Appearance | Yellow transparent oily liquid |
| Oil Content (%) | 90%±2% |
| PH Value | 6.6-8.5 |
| Kinematic Viscosity (30℃, mm²/s) | 110-140 |
| Emulsion Stability (10-20% concentration) | Transparent liquid, no delamination within 3 days |
| Parameter | Value |
|---|---|
| Appearance | White solid |
| Solids Content (%) | 100 |
Elastane Finish and Spandex Finish Selection by Yarn Process
Elastane finish and spandex finish describe the same finishing concept: a processing aid applied to elastane filament to control friction, cohesion, tack and static. When a mill chooses an elastane finish for spandex yarn, the decision should follow the yarn process. A finish for warp knitting, weft knitting, air covering or conventional filament spinning has to suit the guide path, knitting elements, package build and processing conditions. Downstream knitting compatibility, cleanliness at guides and the balance between slip and cohesion all matter. The same chemistry can behave differently when the line speed or guide material changes.
Suretop offers OEM/ODM supply and develops or adjusts formulations to the customer’s fiber type, spinning process and technical requirements. The company provides samples for customer testing and trial production, and can recommend the application rate for the customer’s spinning conditions. A useful trial records the yarn process, denier, luster and equipment details, then compares finish behaviour during winding and downstream knitting before a specification is fixed. This keeps the selection tied to the mill’s own line rather than to a generic starting point.
- SLT-B-9 Spandex Finishing Oil for Warp Knitting Spandex Yarn — for warp knitting spandex yarn.
- SLT-150B-3 Spandex Yarn Spin Finish Oil for Conventional Spandex Filament — for conventional spandex filament.
- SLT-B-505 Spandex Air-Covered Yarn Oil — for air-covered yarn.
- SLT-B-707 Spandex Warp Knitted Yarn Spin Finish — for warp knitted yarn.
- SLT-B-606 Spandex Weft Knitting Yarn Spin Finish — for weft knitting yarn.
- SLT-B-6 High-Performance Spandex Finishes — for spandex finishing.
For a specific spinning condition, send the yarn process, denier, luster and equipment details through the inquiry form. Suretop reviews the request and recommends a starting finish and application rate. The specification tables on this page list the measured values for each model, and the trial result guides the final selection.
Spin Finish Support from Fiber Trial to Drum Delivery
Suretop’s manufacturing site in Xiaoshan District, Hangzhou, Zhejiang Province, China, covers an area of 12,000 m² and has an annual production capacity of 100,000 tons of chemical fiber spin finish. The company researches, develops, produces and sells surfactants and chemical fiber spin finishes. For spandex mills, the work starts with the fiber type, spinning process, denier, luster and equipment details. Samples are supplied for testing and trial production, and Suretop can recommend the application rate for the customer’s spinning conditions. The Spandex Binder is also supplied as a fiber reinforcing agent for the spandex industry.
The MOQ is 200 kg for most Suretop spin finishes, confirmed for the selected product and order. The average lead time is within 15 working days in peak and off season; actual delivery time is arranged according to order quantity, packaging requirements and destination. Transport packaging is given as 200 L and 1,000 L drums. Suretop accepts payment by T/T or L/C and quotes on FOB, EXW, CFR or CIF terms. Payment and quote terms are agreed for the selected grade and order.
Shipping runs by sea, air or express, with Shanghai Port and Ningbo Port as the nearest ports. Suretop’s main markets are Eastern Asia, the Middle East, Southeast Asia and Africa. The R&D team works with several Chinese universities and draws on spin finish technology from Japan and Germany. A dynamic yarn tension testing instrument analyses the properties of the finish on the yarn, which supports trial review before a spandex finish is fixed for production.
The usual order flow starts with fiber, process, denier and equipment details. Suretop recommends a finish, supplies a sample for trial, then produces the selected grade for delivery in drums. The specification tables on this page give the measured values for each spandex model, and the trial result guides the final grade.
How an order runs
- Send your process details
- Fiber type, process (POY, FDY, DTY or industrial yarn), denier and luster, and the spinning equipment you run.
- Finish recommendation
- Suretop proposes a matching finish, or adjusts a formulation to your fiber type and spinning process.
- Sample and trial
- Samples are supplied for testing and trial production, with a recommended application rate for your conditions.
- Order terms
- Payment by T/T or L/C; FOB, EXW, CFR or CIF terms; transport package in 200 L or 1,000 L drums.
- Delivery
- Delivery time is arranged according to order quantity, packaging requirements and destination.
Request a quotation
Describe your fiber, process and equipment, and we will suggest a model and a sample.
Or write to sales@spinfinishoil.com