Polyester Spin Finish: A Guide for POY and FDY Yarn Mills
Polyester filament needs the right surface chemistry to survive high-speed spinning. This guide explains what a polyester spin finish does, how it is applied, and which Suretop POY and FDY grades suit bright, semi-dull, fully matte, fine denier, coarse denier and composite yarns.
Ask for a finish recommendation
- Founded
- 2012
- Annual capacity
- 100,000 tons
- Transport package
- 200 L / 1,000 L drums

What a Polyester Spin Finish Is and What Your Yarn Line Tells Us
A polyester spin finish is the oil applied to polyester filament during spinning, carried with the yarn from the spin line through drawing and winding. Suretop manufactures spin finish oils for polyester, nylon, spandex and aramid fibers from Xiaoshan, Hangzhou, Zhejiang, near the Qiantang River. The company was founded in 2012, runs an annual production capacity of 100,000 tons of chemical fiber spin finish, and covers POY, FDY, DTY and industrial filament yarn production in its product range.
This guide walks through what a finish does and how it is applied on a spinning line, the POY grades for high-speed POY-DTY lines, and the FDY grades matched to spinning equipment and yarn lustre. Buyers can send fiber type, spinning process and yarn specification through the inquiry form and get a grade or formulation recommendation for their own line.

Beaker containing clear colorless liquid 
Beaker of pale yellow liquid against white
Polyester spin finish models and specifications
| Parameter | Value |
|---|---|
| Appearance | Yellow transparent oily liquid |
| Oil Content (%) | 90% ± 2% |
| pH Value | 6.5 ~ 8.5 |
| Kinematic Viscosity (30℃, mm²/s) | 110 ~ 140 |
| Emulsion Stability (10-20%) | Transparent liquid, no phase separation within 3 days |
| Parameter | Value |
|---|---|
| Appearance | Yellow transparent oily liquid |
| Oil Content (%) | 90%±2% |
| pH Value | 6.5–8.5 |
| Kinematic Viscosity (30℃, mm²/s) | 60–90 |
| Emulsion Stability (15–24% concentration) | Transparent liquid, no stratification for 3 days |
| Parameter | Value |
|---|---|
| Appearance | Yellow, transparent oily liquid |
| Oil Content | 90% ± 2% |
| pH Value | 6.5~8.5 |
| Kinematic Viscosity (30℃, mm²/S) | 30~60 |
| Parameter | Value |
|---|---|
| Appearance | Yellow transparent oily liquid |
| Oil Content | 90% ± 2% |
| pH Value | 6.5–8.5 |
| Kinematic Viscosity (30℃, mm²/s) | 30–60 |
| Parameter | Value |
|---|---|
| Appearance | Yellow transparent oily liquid |
| Oil Content (%) | 90%±2% |
| PH Value | 6.6-8.5 |
| Kinematic Viscosity (30℃, mm²/s) | 110-140 |
| Emulsion Stability (10-20% concentration) | Transparent liquid, no delamination within 3 days |
| Parameter | Value |
|---|---|
| Appearance | Colorless and transparent liquid |
| Oil Content (%) | 88% ± 2% |
| pH Value | 5.0 ~ 7.5 |
| Kinematic Viscosity (30℃, mm²/s) | 170 ~ 210 |
| Emulsion Stability (6~12%) | Transparent liquid, no phase separation within 3 days |
| Parameter | Value |
|---|---|
| Appearance | Colorless and transparent liquid |
| Oil Content (%) | 88% ± 2% |
| pH Value | 4.5~7.0 |
| Kinematic Viscosity (30℃, mm²/S) | 150~200 |
| Emulsion Stability (6~12% concentration) | Transparent liquid, no stratification for 3 days |
| Parameter | Value |
|---|---|
| Appearance | Yellow transparent liquid |
| Oil Content | 90% ± 2% |
| pH Value | 4.5 - 7.0 |
| Kinematic Viscosity (30℃, mm²/s) | 140 - 180 |
| Emulsion Stability (6% - 12% concentration) | Transparent liquid, no stratification for 3 days |
| Parameter | Value |
|---|---|
| Appearance | Yellow transparent liquid |
| Oil Content | 88% ± 2% |
| pH Value | 4.5~7.0 |
| Kinematic Viscosity (30℃, mm²/s) | 150~200 |
| Emulsion Stability (6~12% concentration) | Transparent liquid, no stratification for 3 days |
| Parameter | Value |
|---|---|
| Appearance | Light yellow transparent liquid |
| Oil Content (%) | 90%±2% |
| PH Value | 5.0-8.0 |
| Kinematic Viscosity (30℃, mm²/s) | 165-200 |
| Emulsion Stability (6-12% concentration) | Transparent liquid, no delamination within 3 days |
| Parameter | Value |
|---|---|
| Appearance | Yellow, transparent liquid |
| Oil Content (%) | 88% ± 2% |
| pH Value | 4.5 - 7.0 |
| Kinematic Viscosity (30℃, mm²/s) | 150 - 200 |
| Emulsion Stability (6% - 12% concentration) | Transparent liquid, no stratification within 3 days |
| Parameter | Value |
|---|---|
| Appearance | Light yellow transparent liquid |
| Oil Content (%) | 88%±2% |
| PH Value | 5.0-8.0 |
| Kinematic Viscosity (30℃, mm²/s) | 165-200 |
| Emulsion Stability (6-12% concentration) | Transparent liquid, no delamination within 3 days |
| Parameter | Value |
|---|---|
| Appearance | Colorless to pale yellow transparent liquid |
| Oil Content (%) | 90%±2% |
| PH Value | 5.0-7.0 |
| Kinematic Viscosity (30℃, mm²/s) | 150-200 |
| Emulsion Stability (6-12% concentration) | Transparent liquid, no delamination within 3 days |
| Parameter | Value |
|---|---|
| Appearance | Colorless to pale yellow transparent liquid |
| Oil Content (%) | 90%±2% |
| PH Value | 5.0-7.0 |
| Kinematic Viscosity (30℃, mm²/s) | 165-200 |
| Emulsion Stability (6-12% concentration) | Transparent liquid, no delamination within 3 days |
| Parameter | Value |
|---|---|
| Appearance | Yellow transparent liquid |
| Oil Content (%) | 88% ± 2% |
| pH Value | 4.5 - 7.5 |
| Kinematic Viscosity (30℃, mm²/s) | 80 - 150 |
| Emulsion Stability (6 - 12% concentration) | Transparent liquid, no stratification for 3 days |
| Parameter | Value |
|---|---|
| Appearance | Colorless to pale yellow transparent liquid |
| Oil Content (%) | 90%±2% |
| PH Value | 5.0-7.0 |
| Kinematic Viscosity (30℃, mm²/s) | 150-200 |
| Emulsion Stability (6-12% concentration) | Transparent liquid, no delamination within 3 days |
Spin Finish for Polyester: What It Does and How It Is Applied
A spin finish for polyester works at the surface of the filament, where it meets guides, heaters, godets and the winder. It provides lubricity between yarn and guides so filament surfaces slide without abrasion, controls filament cohesion and friction so the bundle holds together through drawing, carries antistatic behaviour that keeps charge from building on fast-running threads, and protects the yarn through drawing and winding where tension and contact pressure are highest. Because the balance between these functions changes from line to line, Suretop develops and adjusts formulations to the customer’s fiber type, spinning process and technical requirements.
The finish is normally applied as a diluted emulsion during spinning. The mill meters it onto the filament at an applicator or finish roll, and the yarn carries it along the yarn path, where it dries as the thread passes through the heated zones. Concentration and add-on are set by the mill to match the process. Suretop’s R&D team works with several Chinese universities and draws on spin finish technology from Japan and Germany, which supports formulation work across fiber types. The wider picture is described in what is spin finish.
A spin finish oil for polyester is supplied as a concentrate that the mill dilutes to an emulsion for application. Selection depends on fiber type, spinning speed range, yarn denier and lustre, and the downstream processes the yarn will pass through. These variables interact, so a grade built for bright fine denier yarn is not the same as one built for fully matte or composite yarn.
Suretop provides samples for customer testing and trial production and can recommend the application rate for the customer’s spinning conditions. OEM/ODM supply is available with formulation development or adjustment. MOQ is confirmed for the selected product and order, transport packing is 200 L and 1,000 L drums, and quotes are given on FOB, EXW, CFR or CIF terms.
POY Spin Finish: Grades for High-Speed POY-DTY Lines
Each POY spin finish below carries its own application, so it can be matched to the yarn being spun rather than to a general description. SLT-165 is a polyester filament POY finish compounded with polyethers, surfactants, antistatic agents and special additives, and its appearance is a colorless and transparent liquid.
- SLT-165 — a spin finish oil for high-speed spinning of polyester filament in the POY-DTY process.
- SLT-3698 — for the high-speed spinning POY-DTY process of polyester filament yarns, applicable to bright yarns.
- SLT-2707 — for the high-speed spinning POY-DTY process, applicable to coarse denier semi-dull yarns and cationic yarns.
- SLT-3788 — for the high-speed spinning POY-DTY process, applicable to fine denier porous matte yarns.
- SLT-3795 — for the high-speed POY-DTY process of polyester filaments, applicable to fully matte yarns.
- SLT-2583 — for the high-speed POY-DTY process of polyester-nylon composite yarn, applicable to polyester-nylon composite yarn.
Other POY items in the range: SLT-3777 POY Spin Finish Suitable for Conventional Heaters and Semi-Dull Polyester Yarn Production, SLT-3799 Polyester POY Spin Finish for Semi-Dull and Black Filament Yarn Reduced Opu, SLT-3698-B Polyester POY Spinning Finish Oil Applied to Bright Filament Yarn, SLT-3795-B Polyester POY Filament Spinning Oil Applied to Full-Dull Polyester Filament Yarn, and SLT-2583-B POY Spinning Finish for Polyester-Nylon Composite Yarn and Sea-Island Fiber Production. The specification tables on this page give the values for each model.
To get a recommendation, share the yarn type, the denier range and the spinning process through the inquiry form. Where the POY is later draw-textured, the coning oil applied at that stage is a separate selection, chosen to work with the finish already on the yarn.
FDY Spin Finish: Grades by Spinning Equipment and Yarn Type
On an FDY line, equipment type and yarn lustre are the first selection factors. Spin equipment differs in contact geometry, thread path and the way the finish is metered onto the filament, and the yarn surface differs by lustre, so a finish has to suit both the machine and the yarn being produced on it.
- SLT-217 — suitable for high-speed spinning of polyester FDY on Wins equipment and applicable to semi-dull yarns.
- SLT-217-D — suitable for high-speed spinning of polyester FDY on Iboxs equipment and applicable to fully dull and bright yarns.
Other FDY items in the range: SLT-1619 Polyester FDY Spin Finish (Regular Type), SLT-1405 Polyester FDY Spin Finish (Wings Equipment), and SLT-1857 FDY Spinning Finish Oil Suitable for Aty Polyester Yarn, Ibox Spinning Equipment.
State the machine make, the yarn type and the process through the inquiry form. Suretop can then develop or adjust a formulation for the line, recommend the application rate for the spinning conditions, and supply a sample for testing and trial production.
How an order runs
- Send your process details
- Fiber type, process (POY, FDY, DTY or industrial yarn), denier and luster, and the spinning equipment you run.
- Finish recommendation
- Suretop proposes a matching finish, or adjusts a formulation to your fiber type and spinning process.
- Sample and trial
- Samples are supplied for testing and trial production, with a recommended application rate for your conditions.
- Order terms
- Payment by T/T or L/C; FOB, EXW, CFR or CIF terms; transport package in 200 L or 1,000 L drums.
- Delivery
- Delivery time is arranged according to order quantity, packaging requirements and destination.
Request a quotation
Describe your fiber, process and equipment, and we will suggest a model and a sample.
Or write to sales@spinfinishoil.com