SuretopRequest a quoteQuote

Coning Oil for Textile Yarn Mills and Nylon DTY

Suretop manufactures spin finish oils in Xiaoshan, Hangzhou for polyester, nylon, spandex and aramid fiber mills, and adjusts formulations to the fiber type, the spinning process and the winding conditions each mill runs.

Request a quote for this oil

Founded
2012
Annual capacity
100,000 tons
Transport package
200 L / 1,000 L drums
Gloved hand holding flask of yellow liquid

What a Coning Oil Is and How Suretop Supplies It

A coning oil is a lubricating finish applied to synthetic filament yarn at coning and winding. It lowers friction between the yarn and the guides, helps hold the filaments together and controls static, so packages build evenly and unwind cleanly at the next process. The balance between lubrication, cohesion and static control is set by the fiber and by the way the yarn is wound. Suretop, founded in 2012 and based in Xiaoshan, Hangzhou, researches, develops, produces and sells chemical fiber spin finishes.

Suretop’s range covers spin finishes for polyester, nylon, spandex and aramid yarns for POY, FDY, DTY and industrial filament production. Formulations are developed or adjusted to the customer’s fiber type and spinning process, and samples are supplied for testing and trial production, so a mill can run the finish on its own line before a full order. Requests outside the current range go to the inquiry form.

Coning oil models and specifications

SLT-500 Nylon DTY Coning Oil Suitable for Conventional Coarse-Denier Nylon Filament Yarn
ParameterValue
AppearanceColorless to pale yellow, viscous, transparent oily liquid
Moisture Content(%)≤ 0.5%
PH Value5.0-8.0
Kinematic Viscosity (40℃, mm²/s)8.0-13.0
Emulsification Performance (1% Aqueous Solution)Forms uniform white emulsion
SLT-1000 Nylon DTY Spinning Finish Oil Suitable for Fine-Denier Conventional Nylon Filament Yarn
ParameterValue
AppearanceColorless to pale yellow, viscous, transparent oily liquid
Moisture Content(%)≤ 0.5%
PH Value5.0-8.0
Kinematic Viscosity (40℃, mm²/s)8.0-13.0
Emulsification Performance (1% Aqueous Solution)Forms uniform white emulsion

Coning Oil for Textile Yarn Production

A coning oil for textile filament yarn is selected by fiber type, yarn structure and denier, the spinning and winding conditions, and the process the package goes to next. Luster, package form and the equipment on the line shift the balance between lubrication, cohesion and static control. Suretop offers OEM/ODM supply and develops or adjusts formulations to the customer’s fiber type, spinning process and technical requirements, and recommends the application rate for those spinning conditions.

Samples are supplied for testing and trial production before an order is placed. The MOQ is 200 kg for most Suretop spin finishes, confirmed for the selected product and order, and Suretop’s average lead time is within 15 working days; actual delivery is arranged by order quantity, packaging requirements and destination.

Antistatic Coning Oil for Synthetic Filament Yarn

Static builds when filament yarn runs over guides and rollers, and it shows up as spreading filaments, clinging ends and uneven packages. Antistatic agents in a finish carry the charge away from the yarn surface, so the yarn runs and unwinds smoothly through coning and the following process. How much antistatic component a finish carries is balanced against its lubrication and cohesion, because the three functions pull on each other on the line.

Suretop compounds and adjusts formulations to the customer’s fiber type, spinning process and technical requirements, and supplies samples for customer testing. Mills that need a specific grade for their yarn and equipment can send the details through the inquiry form, and the formulation work starts from that description.

Coning Oil Uses in Fiber and Yarn Mills

  • Lubrication of the yarn at coning and winding, where friction on guides and tensioners is highest
  • Friction control inside the package, so the yarn does not abrade itself in the build
  • Static control that keeps filaments from spreading and clinging during unwinding
  • Smoother running at the next process, with fewer breaks and less fly
  • Even unwinding behaviour, so the package delivers consistent yarn to knitting, weaving or texturing

Suretop manufactures spin finish oils for polyester, nylon, spandex and aramid fibers, covering DTY and filament yarn production, and can recommend the application rate for the customer’s spinning conditions. Polyester lines are covered by the polyester spin finish range, and mills with other uses for a coning oil can tell us about them on the inquiry form.

Texturing Oil and DTY Oil

Texturing oil and DTY oil are two names for the finish applied during draw texturing of synthetic filament yarn. The finish has to carry the yarn through the false-twist zone and then leave the package ready to unwind, so selection depends on fiber type, yarn and process conditions such as texturing speed and the downstream fabric route. Mills weigh lubrication against cohesion and static control for their own line.

Suretop develops or adjusts formulations to the customer’s fiber type, spinning process and technical requirements, and supplies samples for testing and trial production. SLT-500 Nylon DTY Coning Oil, suitable for conventional coarse-denier nylon filament yarn, is the grade on this page, and the wider selection is set out under nylon spin finish.

Nylon DTY Coning Oil Grades and Supply Terms

This page lists two grades: SLT-500 Nylon DTY Coning Oil Suitable for Conventional Coarse-Denier Nylon Filament Yarn and SLT-1000 Nylon DTY Spinning Finish Oil Suitable for Fine-Denier Conventional Nylon Filament Yarn. Their properties are listed in the specification tables on this page.

Suretop supplies spin finish oils in 200 L and 1,000 L drums and ships by sea, air or express, with Shanghai Port and Ningbo Port as the nearest ports. Quotes are given on FOB, EXW, CFR or CIF terms, payment is by T/T or L/C, and the main markets are Eastern Asia, the Middle East, Southeast Asia and Africa.

How an order runs

Send your process details
Fiber type, process (POY, FDY, DTY or industrial yarn), denier and luster, and the spinning equipment you run.
Finish recommendation
Suretop proposes a matching finish, or adjusts a formulation to your fiber type and spinning process.
Sample and trial
Samples are supplied for testing and trial production, with a recommended application rate for your conditions.
Order terms
Payment by T/T or L/C; FOB, EXW, CFR or CIF terms; transport package in 200 L or 1,000 L drums.
Delivery
Delivery time is arranged according to order quantity, packaging requirements and destination.

Request a quotation

Send the model or your yarn details and quantity; we will confirm a matching oil.

Or write to sales@spinfinishoil.com

* Required