Aramid Spin Finish: Selection and Supply Guide
Aramid finish supports lubrication, static control, cohesion and fiber protection during aramid production. This guide explains how to match a finish to fiber type, spinning stage and downstream processing, and how Suretop supplies aramid products from Xiaoshan, Hangzhou.
Ask for a finish recommendation
- Founded
- 2012
- Annual capacity
- 100,000 tons
- Transport package
- 200 L / 1,000 L drums
Aramid Spin Finish Selection and Supply
Aramid spin finish is a formulation applied during aramid production to reduce friction, control static charge, hold filaments together and protect the fiber surface through spinning and later handling. Selection depends on fiber type, spinning stage, yarn use and downstream processing. A finish that suits crude oil finishing may not suit para-aramid fiber production, so the line conditions and the handling steps after spinning set the starting point for the formulation.
Suretop offers SLT-900 Aramid Oil Agent, which is suitable for the aramid production process and is used as the crude oil finishing agent for aramid oiling. Suretop also offers SLT-900-AB Para-Aramid Spin Finish Oil for Para-Aramid Fiber Production. A buyer can use these names to frame a request: SLT-900 for aramid crude oil finishing, and SLT-900-AB for a para-aramid fiber line. The names keep a request specific and avoid transferring a property between products.
For a precise recommendation, send the fiber type, spinning stage, yarn use, downstream processing steps and oiling equipment through the inquiry form. Suretop reviews the application and can propose a product from its aramid range. Specific line details help match the finish to the spinning and handling route. General background on what a finish does at the fiber surface is available in the spin finish guide.
- Fiber type and filament structure, including the difference between aramid crude oil finishing and para-aramid fiber production.
- Spinning stage and oiling point, because the finish must work at the point where it is applied.
- Yarn use and downstream processing, because later handling changes the balance of lubrication and cohesion.
- Equipment and application method, because bath stability and wetting behavior affect the result.
Aramid spin finish models and specifications
| Parameter | Value |
|---|---|
| Appearance | Yellow transparent liquid |
| Moisture Content (%) | ≤2.0 |
| Oil Content (%) | ≥98.0 |
| pH Value (1% aqueous solution) | 6.5~8.5 |
| Kinematic Viscosity (30℃, mm²/S) | 60-100 |
| Parameter | Value |
|---|---|
| Appearance | Yellow transparent oily liquid |
| Oil Content (%) | 90%±2% |
| PH Value | 6.6-8.5 |
| Kinematic Viscosity (30℃, mm²/s) | 110-140 |
| Emulsion Stability (10-20% concentration) | Transparent liquid, no delamination within 3 days |
Matching Aramid Finish to Fiber and Process Conditions
The choice of aramid finish begins with the fiber and the spinning stage. A finish used in aramid crude oil finishing must support the oiling step and leave the fiber in a condition that suits later handling. A finish intended for para-aramid fiber production must remain stable through the line and keep the filament bundle coherent. Yarn use and downstream processing then refine the choice: a yarn that will be further processed may need a different balance of lubricity, cohesion and static control from a yarn sold as a package.
A well-matched finish limits filament-to-metal friction, manages static charge, holds filaments together and protects the fiber surface from abrasion. If lubrication is too low, the fiber can be damaged; if it is too high, the package can become unstable. Emulsion stability, viscosity, pH and oil content are therefore practical selection points, and the specification tables on this page give the measured properties for SLT-900 and SLT-900-AB. Compare those properties with the spinning and handling conditions rather than treating a value as a stand-alone answer.
Downstream processing can change the finish requirement. Washing, heat exposure, friction points and package build all affect how much finish should remain on the yarn and how easily it should be removed or carried forward. A finish that works at the oiling point but fails in later handling is a poor match for the line. The right finish for aramid crude oil finishing is therefore the finish that matches the whole route, not only the oiling bath. The industrial yarn spin finish page covers related process considerations for industrial filament yarns.
Finish application also matters. The oiling point, bath concentration, temperature and contact time influence how much finish the fiber carries. A finish that performs well in a stable bath can behave differently when the bath is replenished or when line speed changes. Suretop can recommend the application rate for the customer’s spinning conditions, and the specification tables on this page help compare SLT-900 and SLT-900-AB on the properties that matter for the line.
Sampling, Packaging and Delivery of Aramid Finishes
Suretop provides samples for customer testing and trial production, and can recommend the application rate for the customer’s spinning conditions. The company also offers OEM/ODM supply and develops or adjusts formulations to the customer’s fiber type, spinning process and technical requirements. Hangzhou Suretop Oil Co., Ltd. was founded in 2012 and manufactures spin finish oils in Xiaoshan, Hangzhou, Zhejiang, China, near the Qiantang River. Suretop’s product range covers spin finish oils for polyester, nylon, spandex and aramid fibers, for POY, FDY, DTY and industrial filament yarn production.
The plant covers 12,000 m² and has an annual production capacity of 100,000 tons of chemical fiber spin finish. Suretop researches, develops, produces and sells surfactants and chemical fiber spin finishes. Its R&D team works with Chinese universities and draws on spin finish technology from Japan and Germany. Suretop has introduced a dynamic yarn tension testing instrument developed by Lawson-Hemphill (USA) to analyse the properties of the finish on the yarn.
Orders are packed in 200 L and 1,000 L drums. The MOQ is 200 kg for most Suretop spin finishes; Suretop confirms the MOQ for the selected product and order. The average lead time is within 15 working days in peak and off season, and actual delivery time is arranged according to order quantity, packaging requirements and destination. Payment is by T/T or L/C, and Suretop offers FOB, EXW, CFR and CIF terms.
Shipments go by sea, air or express. The nearest ports are Shanghai Port and Ningbo Port. Suretop’s main markets are Eastern Asia, the Middle East, Southeast Asia and Africa. More detail on the plant and production flow is on the manufacturing page.
How an order runs
- Send your process details
- Fiber type, process (POY, FDY, DTY or industrial yarn), denier and luster, and the spinning equipment you run.
- Finish recommendation
- Suretop proposes a matching finish, or adjusts a formulation to your fiber type and spinning process.
- Sample and trial
- Samples are supplied for testing and trial production, with a recommended application rate for your conditions.
- Order terms
- Payment by T/T or L/C; FOB, EXW, CFR or CIF terms; transport package in 200 L or 1,000 L drums.
- Delivery
- Delivery time is arranged according to order quantity, packaging requirements and destination.
Request a quotation
Describe your fiber, process and equipment, and we will suggest a model and a sample.
Or write to sales@spinfinishoil.com