SuretopRequest a quoteQuote

Nylon Spin Finish for PA6 and PA66 Filament Yarn

Nylon spin finish supports stable running of PA6 and PA66 filament yarns in POY, FDY, DTY and industrial yarn production. Suretop makes finish oils in Xiaoshan, Hangzhou, for mills that need a formulation matched to fiber, route and denier.

Ask for a finish recommendation

Founded
2012
Annual capacity
100,000 tons
Transport package
200 L / 1,000 L drums
Clear liquid sample in graduated glass beaker

What Nylon Spin Finish Is and How to Choose It

A nylon spin finish is a finish oil applied to nylon filament yarn. It supports yarn running, controls friction, improves cohesion and manages static during spinning and downstream processing. Selection depends on the fiber type, such as PA6 or PA66, the spinning route, such as POY, FDY, DTY or industrial yarn, and the yarn denier. The finish balance changes with the surface area and friction of the yarn, so a mill may need a different formulation for fine, coarse or ultra-fine denier programs.

Suretop is a manufacturer of spin finish oils for polyester, nylon (PA6 and PA66), spandex and aramid fibers. Founded in 2012, Suretop has an annual production capacity of 100,000 tons of chemical fiber spin finish. Its nylon range includes SLT-6352 Nylon FDY Spin Finish (Fine Denier), SLT-6258 Polyamide FDY Spin Finish (Coarse Denier), SLT-3000 Nylon FDY Spin Finish (ATY), SLT-6742S Nylon POY Spin Finish (Coarse Denier), SLT-6582C Nylon POY Spin Finish (Fine Denier) and SLT-6384D Nylon POY Oil (Ultra-fine Denier).

Samples are available for testing and trial production. Suretop develops or adjusts formulations to the customer’s fiber type, spinning process and technical requirements, and can recommend the application rate for the customer’s spinning conditions.

Send the fiber type, spinning route, denier and equipment through the inquiry form for a specific recommendation. A guide to spin finishes explains the basic functions of finish oils in filament yarn production and how they are applied. This helps a mill compare the finish behavior needed for its own yarn and line before sampling.

Nylon spin finish models and specifications

SLT-6352 Nylon FDY Spin Finish (Fine Denier)
ParameterValue
AppearanceYellow transparent liquid
Oil Content (%)95% ± 2%
pH Value6.5–8.5
Kinematic Viscosity (30℃, mm²/s)40–80
Emulsion Stability (6–16% concentration)Transparent liquid with no stratification for 3 days
SLT-6258 Polyamide FDY Spin Finish (Coarse Denier)
ParameterValue
AppearanceYellow transparent liquid
Oil content (%)88%±2%
pH value6.5–8.5
Kinematic viscosity (30℃, mm²/s)60–100
Emulsion stability (6–16% concentration)Transparent liquid, no stratification for 3 days
SLT-3000 Nylon FDY Spin Finish (ATY)
ParameterValue
AppearanceYellow transparent liquid
Oil Content88%±2%
pH Value6.5~8.5
Kinematic Viscosity (30℃, mm²/s)40~80
Emulsion Stability (10~15% concentration)Transparent liquid, no stratification for 3 days
SLT-6742S Nylon POY Spin Finish (Coarse Denier)
ParameterValue
AppearancePale yellow transparent liquid
Oil Content (%)85% ± 2%
pH Value7.0~8.5
Kinematic Viscosity (30℃, mm²/s)80~100
Emulsion Stability (6~12% concentration)Transparent liquid, no stratification for 3 days
SLT-6582C Nylon POY Spin Finish (Fine Denier)
ParameterValue
AppearanceYellow transparent liquid
Oil Content85% ± 2%
pH Value7.0 - 8.5
Kinematic Viscosity (30℃, mm²/s)65 - 85
Emulsion Stability (6 - 12% concentration)Transparent liquid, no stratification for 3 days
SLT-6384D Nylon POY Oil (Ultra-fine Denier)
ParameterValue
AppearanceYellow transparent liquid
Oil Content (%)85% ± 2%
pH Value7.0 - 8.5
Kinematic Viscosity (30℃, mm²/s)65 - 85
Emulsion Stability (6% - 12% concentration)Transparent liquid, no stratification for 3 days

Matching Nylon Finishes to POY, FDY, DTY and Industrial Yarn Routes

The spinning route sets the balance between friction control, cohesion and static dissipation. FDY lines usually need finish behavior that supports high-speed running and package build. POY for DTY needs carry-through to texturing, while DTY and coning need oils that support false-twist and winding. Industrial yarns need finishes for cord and high-strength uses. Denier and luster change surface area and friction, so the same polymer may need a different finish for fine, coarse or ultra-fine yarn.

For FDY, Suretop lists SLT-6352 Nylon FDY Spin Finish (Fine Denier) for the high-speed spinning of fine-denier conventional yarns. The product is compounded with synthetic esters, surfactants, antistatic agents and special additives. SLT-6258 Polyamide FDY Spin Finish (Coarse Denier) is suitable for the high-speed spinning process of conventional nylon coarse denier yarns. SLT-3000 Nylon FDY Spin Finish (ATY) is suitable for the high-speed spinning process of nylon and has good processing performance in air-textured yarn (ATY); it also extends the cleaning cycle of post-spinning ATY nozzles. It is well compatible with sizing agents, can form a high-strength size film on fibers, and no yarn desizing will occur.

For POY, SLT-6742S Nylon POY Spin Finish (Coarse Denier) is suitable for the high-speed spinning POY-DTY process of nylon filament yarns and applies to conventional coarse denier yarns. SLT-6582C Nylon POY Spin Finish (Fine Denier) suits the POY-DTY process of nylon high-speed spinning and fine denier conventional yarns. SLT-6384D Nylon POY Oil (Ultra-fine Denier) suits the nylon high-speed spinning POY-DTY process and ultra-fine denier conventional yarns.

Industrial yarn programs are covered by SLT-100 Nylon Industrial Yarn Oil, SLT-60 Industrial Yarn Spin Finish for Nylon Cord (Tire Cord) and SLT-80 Industrial Yarn Spin Finish for Nylon 66 (High-Strength Yarn). The industrial yarn spin finish and coning oil pages describe related programs. Send the yarn route and denier with the inquiry so the finish shortlist matches the line.

How Suretop Supplies Nylon Spin Finish from Xiaoshan

Suretop’s plant is in Xiaoshan District, Hangzhou, Zhejiang Province, near the Qiantang River. The site covers 12,000 m². The R&D team works with several Chinese universities and draws on spin finish technology from Japan and Germany. Suretop has introduced a dynamic yarn tension testing instrument developed by Lawson-Hemphill (USA), which analyses the properties of the finish on the yarn. This supports formulation work for nylon spin finish projects and helps relate finish behavior to yarn running.

The MOQ is 200 kg for most Suretop spin finishes, confirmed for the selected product and order. Suretop’s average lead time is within 15 working days in peak and off season. Actual delivery time is arranged according to order quantity, packaging requirements and destination. Transport packaging is given as 200 L and 1,000 L drums. These steps keep a nylon spin finish order aligned with the mill’s route, denier and handling needs.

Suretop accepts payment by T/T or L/C and quotes on FOB, EXW, CFR or CIF terms. The nearest ports are Shanghai Port and Ningbo Port, and shipments go by sea, air or express. Main markets are Eastern Asia, the Middle East, Southeast Asia and Africa. Suretop offers OEM/ODM supply and develops or adjusts formulations to the customer’s fiber type, spinning process and technical requirements. Send fiber, process, denier and equipment details through the inquiry form for a specific recommendation.

How an order runs

Send your process details
Fiber type, process (POY, FDY, DTY or industrial yarn), denier and luster, and the spinning equipment you run.
Finish recommendation
Suretop proposes a matching finish, or adjusts a formulation to your fiber type and spinning process.
Sample and trial
Samples are supplied for testing and trial production, with a recommended application rate for your conditions.
Order terms
Payment by T/T or L/C; FOB, EXW, CFR or CIF terms; transport package in 200 L or 1,000 L drums.
Delivery
Delivery time is arranged according to order quantity, packaging requirements and destination.

Request a quotation

Describe your fiber, process and equipment, and we will suggest a model and a sample.

Or write to sales@spinfinishoil.com

* Required